How to install PVC wall panel

At present, most families choose to install wall panel to protect the wall, it can widely reduce the impact on the wall. Wall panel is not only practical, but also beautiful and good-looking. PVC wall panel with the advantages of low price, rich style, it is popular around the world.  Next, let's look at the advantages of PVC wall panels and its installation methods.  

The advantages of PVC wall panels:

1. PVC wall panel has the same processability as log, which can be nailed and sawed, and also easy to cut and drill. It can be fixed just use the nails or bolts. The surface texture is very smooth, no need to paint the spray. Compared with logs, wall panel has more physical advantages, good stability, difficult to crack, warping, twill and so on.

2. PVC wall panel has the feature of water resistance and good fire resistance. It also environmental friendly and corrosion resistant. It no need to carry out too much maintenance in our daily maintenance process.

3. Comparing with the plastic wall material, the hardness is high and the use time is longer. In addition, the light weight is convenient for construction, transportation and installation.

4. PVC wallboard has many designs and patterns, rich in color. Wall panel installation is very convenient, after the overall wall decoration, it can instantly promote the decorate grade. It is widely used in indoor walls, such as entertainment places, conference centers, etc.

The steps of install PVC wall panel:

1. Wall measurement: measure the length of the wall panel, and then to calculate the size and number of the wall panel.

2. Fix hole in aluminum alloy nail: fix skirting on the wall and then make hole on the skirting with expansion screws or steel nail according to the hole distance.

3. Install the top Angle line: Apply special glue on both ends, stick the top Angle, and then pull it apart for a few minutes, tightly stick is fine. 

4. Install the wall panel: insert the wall panel into the skirting line from left to right, then install the expansion screws or steel nails at the place of 1.5 cm away from the upper mouth of the wall panel. (pay special attention to the screw cannot be exposed outside the wall panel surface.) 

5. Install rubber anti-collision strip in the position of the aluminum alloy bayonet, ensure that the left and right sealing is inserted on both sides of the clapboard. Cut the length of the PVC wall panel, cover the panel in aluminum alloy, and finish the installation.