​Welcome to ANDA

You are here:Home » News » News

NEWS

PVC Extruder Operation Process Section One

[NEWS] PVC Extruder Operation Process Section One 2024-01-12

This article describes the operation process of the extrusion machine in details, from mixing process to extrusion process, starting process to ending process, hoping to provide constructive suggestions to relevant industry practitioners in the future.

Read More
PVC Profile Production Process And Precautions

[NEWS] PVC Profile Production Process And Precautions 2023-12-19

This article describes common UPVC profile production process in detail and the precautions that need to be paid attention to in the process, hoping to be helpful to relevant practitioners.

Read More
How to Clean the Extruder Screw? How to Deal With a Sudden power outage?

[NEWS] How to Clean the Extruder Screw? How to Deal With a Sudden power outage? 2023-02-02

For extruders used in the manufacture of thermosetting powder coatings, when changing coating resin types or color types, the machine must be cleaned to prevent interference between powder coating types and ensure the quality of the produced products. When the extruder is not cleaned thoroughly, the most obvious effect is on the color of the powder coating, which can be directly observed.

Read More
What is the cleaning method for the extruder screw?

[NEWS] What is the cleaning method for the extruder screw? 2023-01-30

When the extruder needs to clean the screw, it is usually because the color is changed or there are black spots after the machine is turned off. There are two common methods: one is to wash with raw materials or nozzle materials, and the other is to directly pull out the screw for polishing and cleaning.

Read More
Know More About Extruder Temperature Control System

[NEWS] Know More About Extruder Temperature Control System 2022-09-28

The most important production process in the production of plastic profiles is the control of temperature parameters. The temperature control accuracy of the extruder directly determines the product quality and mechanical properties. At the same time, the barrel temperature has a direct and obvious influence on the plasticization and mixing of raw materials.

Read More
SPC Floor Processing Technic

[NEWS] SPC Floor Processing Technic 2022-06-24

Different kinds of weight of materials, the need to use the corresponding precision of weighing instrument, to ensure the accuracy of weighing. Integration of materials: convenient storage weighing flow feeding, sampling check components and accuracy if it is automatic weighing system also need to monitor and review.

Read More
Know More About PVC Marble Sheet Making Machine

[NEWS] Know More About PVC Marble Sheet Making Machine 2022-06-10

The Advantages of PVC Polygranite Sheet Machine 1. the material composition is polymer material, 100% waterproof, so there is no mildew and moisture problems. 2. the surface is high definition, strong three-dimensional effect, imitation degree of more than 95%. 3. after the surface UV special treatment, make the board surface smooth, not easy to scratch, convenient dust removal.

Read More
What is WPC Wall Panel?

[NEWS] What is WPC Wall Panel? 2022-06-01

WPC is a new type of environmentally friendly wood plastic composite material products. The xyphenol produced in the production of high-density fiberboard is added into the recycled plastic and made into wood plastic composite material through the granulation equipment, and then the production group is extruded to make wpc floor.

Read More
How to Produce PVC WPC Wall Panel?

[NEWS] How to Produce PVC WPC Wall Panel? 2022-05-26

The Advantages of PVC Wall Panel Fire Prevention, Reduce Noise and Promote Sleep, Warm In Winter and Cool In Summer, Wear Resistance, Healthy and Environmentally Friendly, Waterproof and Moistureproof, Beautify Your Space, Convenient Installation, Easy To Scrub, No Deformation, Anti-Corrosion and Durable

Read More
How to Choose Air Cooling and Water Cooling

[NEWS] How to Choose Air Cooling and Water Cooling 2022-05-19

The cooling system of the extruder (along with the heating system) is designed to ensure that the plastic is extruded at the required temperature. During the extrusion process, the friction shear heat generated by the rotation of the screw is often more than the heat required by the material, which will lead to the material temperature in the barrel is too high. If too much heat is not discharged in time, the material (especially the heat-sensitive plastic) will decompose, and sometimes it will make the molding difficult to carry out. To do this, the barrel and screw must be cooled.

Read More
How to Clean the PVC Extrusion Screw Properly

[NEWS] How to Clean the PVC Extrusion Screw Properly 2022-05-07

Commodity economy is highly developed today, there is no lack of all kinds of screw cleaners (screw cleaning materials) on the market, most of them are expensive, the use effect is difficult to say. Whether to use commercial cleaners is depends on different situation and production of manufacturers. Plastic production enterprises can also according to their own production situation, using different resins to do screw cleaning material, which can save a large cost for the manufacturer.

Read More