Welcome to ANDA
Welcome to ANDA
Choosing between 3mm, 12mm, 18mm, and 25mm WPC foam board is not only a product decision. It affects die design, cooling length, haul-off stability, cutting accuracy, daily output, and the type of customers a factory can serve. Thin board buyers care about clean surfaces and easy printing. Furniture and cabinet buyers pay attention to screw holding, flatness, edge quality, and stable thickness. A well-matched WPC foam board production line helps a plant cover these markets without wasting power, floor space, or raw material.
Different thicknesses sell into different jobs. A 3mm board is handled like a light sheet. A 25mm board is closer to a structural panel. Between them, 12mm and 18mm boards are common choices for decoration, partition, cabinet, and furniture work.
Thickness | Typical applications | Production focus |
3mm | Advertising signs, display backing, printed panels | Smooth surface, tight thickness control |
12mm | Interior partitions, cabinet backs, shopfitting | Flatness, stable density |
18mm | Cabinet bodies, bathroom furniture, shelves | Rigidity, screw holding, uniform foaming |
25mm | Door cores, thick partitions, worktops | Cooling balance, low warpage |
For 3mm WPC foam board, the market usually wants a flat, clean panel for printing, laminating, or display fabrication. The board must pass through the line smoothly without fluttering or edge waves. Even small thickness changes can show up after printing.
A 12mm WPC foam board is useful where the board must be stronger than a thin sign sheet but still easy to cut on site. It fits partition panels, display furniture, cabinet backs, and shop counters. This thickness needs a good balance between output speed and core foaming quality.
An 18mm WPC foam board is often selected for cabinet bodies, shelves, bathroom furniture, and moisture-prone interior panels. Buyers normally check edge quality, screw performance, flatness, and surface bonding. Stable foaming and steady haul-off speed matter more than simply running the line fast.
A 25mm WPC foam board is used where thickness gives a more solid feel, such as door panels, heavy partitions, worktops, and thicker decorative boards. The production line must give the board enough forming and cooling time, or the panel may bend, shrink, or show uneven density after stacking.
Anda’s WPC foam board production line covers practical thickness programs such as 3–20mm, 5–30mm, and 3–25mm, depending on configuration. It supports common widths such as 915mm and 1220mm for advertising, furniture, cabinet, and partition board production.
A WPC foam board machine is a full process, not a single extruder. Raw material feeding, plasticizing, foaming, die forming, calibration, cooling, hauling, cutting, and stacking all change with board thickness. The thicker the board, the more the line must control heat history and pulling force.
The screw and barrel must plasticize the PVC/WPC formulation evenly before the melt reaches the die. A specialized PVC foam screw helps create a uniform cell structure for both light 3mm sheets and thick 25mm boards. Uniform foaming reduces hard spots, pinholes, and weak edges.
Thin boards need quick shape setting and stable support. Thick boards need slower, deeper cooling so the surface and core do not fight each other after cutting. The cooling table, haul-off machine, and downstream speed must work as one system.
Cutting accuracy becomes more visible as panels move into furniture and cabinet use. Dust control, blade stability, and clean stack handling help reduce rework. Heavy 18mm and 25mm boards also need a stacker that keeps panels flat during cooling after cutting.
Line section | 3mm board setting | 12mm and 18mm setting | 25mm board setting |
Die and calibration | Surface and edge stability | Balance surface, density, width | Shape holding and pressure control |
Cooling table | Fast, even cooling | Longer cooling, steady support | Deeper cooling, lower stress |
Haul-off | Light pressure, stable speed | Medium pressure, no slip | Strong grip without marks |
Cutting | Clean edge, low burr | Accurate panel length | Stable cutting and stacking |
Anda’s PVC/WPC foam board extrusion line includes the main extruder, cooling table, hauling machine, cutting machine, and stacker. The intelligent control system displays production parameters digitally and helps operators monitor, store, download, and print production data.
A board may look simple, but buyers judge it during cutting, fixing, finishing, and long-term use. WPC and PVC foam boards are valued because they are lightweight and easy to process while offering useful resistance in wet or corrosive environments.
Common performance expectations include:
· waterproof and moisture-proof behavior for kitchens, bathrooms, and humid shops;
· flame-retardant and anti-corrosive features for interior panels and partitions;
· moth resistance, aging resistance, sound insulation, and heat insulation;
· easy drilling, sawing, nailing, engraving, welding, and bonding with PVC materials.
For a sign shop, 3mm board should print cleanly and cut without chipping. For a furniture factory, 18mm board should hold its shape when used as a cabinet side panel. For a contractor, 25mm board should feel firm enough for partitions or door-related work.
Anda’s WPC foam board production line is designed to make boards with stable foaming, a smooth working surface, and broad processing use. The line can support medium-density panels for furniture, cabinet, advertising, and decorative board markets.
A factory buying a PVC foam board making machine should first decide what it wants to sell every week, not only what maximum thickness looks attractive. A plant focused on 3mm advertising sheets may need more attention to speed, surface, and printing compatibility. A plant focused on 18mm cabinet boards needs reliable output, flat stacking, and repeatable density.
Daily planning should include target thickness mix, board width, expected capacity, workshop length, material handling, finished board storage, formula support, spare parts, operator training, and commissioning support. A line with too little capacity can block sales growth. A line that is too large for the first market may create unnecessary cost.
Anda provides turnkey support for PVC/WPC foam board production, including technical consultation, machinery selection, formula and raw material guidance, installation, commissioning, training, and production support. This helps factories move from equipment purchase to stable commercial output.
Zhangjiagang Anda Machinery Co., Ltd. works as an integrated plastic extrusion solution provider for PVC and WPC production lines. Its product range covers WPC production lines, PVC sheet and board extrusion lines, wall panel and ceiling panel lines, profile extrusion lines, pipe machines, lamination machines, pulverizers, mixers, and auxiliary equipment. The company has supplied more than 1,000 production lines or single machines to plastic companies in different markets.
For buyers comparing a WPC foam board production line manufacturer, the value lies in more than the machine body. Project planning, factory layout, trial production, operator training, and after-sales support all affect whether the line reaches stable output. Anda also shares machine videos for buyers who want to see running equipment and finished board handling before discussing a project.
Anda’s WPC foam board production line is suitable for producers who need a practical board range for advertising, cabinet, furniture, wall partition, and decorative panel markets. Buyers can also watch Anda WPC foam board production line videos to review equipment operation and production details before sending technical requirements.
The best WPC foam board thickness depends on the job. A 3mm board fits light advertising and decorative work. A 12mm board covers interior and shopfitting uses. An 18mm board is a strong candidate for cabinet and furniture production. A 25mm board serves heavier partitions, door panels, and solid-feel decorative products.
A properly configured WPC foam board production line gives factories the flexibility to serve several board markets from one process platform. For investors planning PVC foam board extrusion, the practical choice is a line that matches thickness range, width, capacity, density, workshop layout, and technical support from the start.
For many cabinet and furniture parts, 18mm WPC foam board is widely used because it offers better rigidity than thin sheets while remaining workable with common woodworking tools. The final choice depends on span, screw fixing, surface finish, and load.
Yes, a suitable WPC foam board production line can be configured for a wide board range, but settings need to change. Thin boards need tighter surface and speed control. Thick boards need stronger cooling, stable haul-off, and careful stacking.
A 12mm WPC foam board is often used for interior partitions, cabinet backs, display furniture, wall decoration, and shopfitting panels. It is a useful middle thickness when buyers want a light but firm board.
Buyers should prepare target thicknesses, board width, density, daily output, surface finishing plan, workshop size, voltage, raw material availability, and main applications. These details help match the WPC foam board machine to real production needs.
