Welcome to ANDA
PVC Ceiling Making Machine is mainly used in PVC Ceiling. For different sectional surface and molds, twin conical screw extruder of different specifications can be chosen together with corresponding vacuum calibrating table, haul-off unit, cutting unit, tilter, etc.
Capacity of main frame can be optionally chosen from 150-250 kgs/hour.
2. We can show you running PVC ceiling production line in our factory and our customer's factory.
3. The most important thing is that we have manufacturing PVC ceiling panel machine for over 20 years, we are familiar with all production process and we know how to make machines perfect and how to reduce production cost.
Process flow of PVC ceiling making machine:
Mixer → extrusion → surface treatment (including three types: two color printing, hot stamping, and lamination)
According to our formula(main raw material is PVC resin and caco3), raw materials are mixed in the mixer and tranported to the extruder. Through the PVC ceiling extrusion line, panel forming. It you adopt hot stamping and lamination, after extrusion line, your product is finished, But if you adopt two color printing, you can print it offline in the printing machine.
Features of the PVC wall panel machine:
1. The calcium powder required in the board formula can be increased up to 50%-250% and the required amount of the auxiliary material decreased by 30%.
2. The products made using the PVC ceiling extrusion machine offer a fine appearance and uniform plasticization.
3. Through the use of a PID controller, the PVC ceiling extrusion machine provides an automatic alarm in case of a problem with any component.
Model | 48/105 | 55/110 | 65/132 |
Product width(mm) | 160/200 | 250-500 | 250-600 |
Extruder | SJSZ48 | SJSZ55/110 | SJSZ65/132 |
Capacity(m2/24h) | 800 | 1200 | 1600 |