Welcome to ANDA
This machine designed to laminate PVC film or paper on flat or curved surfaces. It is widely used to laminate film or paper on PVC or WPC window & door profiles, ceiling, cabinet boards, MDF board, WPC board, extrusion profiles.
Brief introduction
This machine designed to laminate PVC film or paper on flat or curved surfaces. It is widely used to laminate film or paper on PVC or WPC window & door profiles, ceiling, cabinet boards, table tops.
It consists of dust cleaner, glue scraper, film pre-heater and laminating system. It is driven by worm wheel and shaft. It is equipped with photo-electric tracer, film tension device, pneumatic cylinder controlled heating tunnel and two film loaders.
Main Features
Long compounding part, offer best lamination effect and higher efficiency
Both curtain glue coating and roller coatingg glue system are optional for different applicable
with device for coating affinity binding agent for easy adhesive, special good for UPVC window and door profiles
Film extension shaft is pneumatic expansion shaft with constant tension controller
Film releasing has automatic tracer, automatic adjust the releasing deviation
Main parameters
Max working width | 400 mm |
Board thickness | 2-80 mm |
Working speed | 5-15 m/min |
Main motor | 1.5KW |
Glue motor | 0.37KW |
Heating tunnel | 4KW |
Total power | 6.5kw |
Weight | 2500 kgs |
Dimensions | 5500*1000*2200mm |