NEWS

[NEWS] Know More About PVC Marble Sheet Making Machine 2022-06-10

The Advantages of PVC Polygranite Sheet Machine 1. the material composition is polymer material, 100% waterproof, so there is no mildew and moisture problems. 2. the surface is high definition, strong three-dimensional effect, imitation degree of more than 95%. 3. after the surface UV special treatment, make the board surface smooth, not easy to scratch, convenient dust removal.

[NEWS] What is WPC Wall Panel? 2022-06-01

WPC is a new type of environmentally friendly wood plastic composite material products. The xyphenol produced in the production of high-density fiberboard is added into the recycled plastic and made into wood plastic composite material through the granulation equipment, and then the production group is extruded to make wpc floor.

[NEWS] How to Produce PVC WPC Wall Panel? 2022-05-26

The Advantages of PVC Wall Panel Fire Prevention, Reduce Noise and Promote Sleep, Warm In Winter and Cool In Summer, Wear Resistance, Healthy and Environmentally Friendly, Waterproof and Moistureproof, Beautify Your Space, Convenient Installation, Easy To Scrub, No Deformation, Anti-Corrosion and Durable

[NEWS] How to Choose Air Cooling and Water Cooling 2022-05-19

The cooling system of the extruder (along with the heating system) is designed to ensure that the plastic is extruded at the required temperature. During the extrusion process, the friction shear heat generated by the rotation of the screw is often more than the heat required by the material, which will lead to the material temperature in the barrel is too high. If too much heat is not discharged in time, the material (especially the heat-sensitive plastic) will decompose, and sometimes it will make the molding difficult to carry out. To do this, the barrel and screw must be cooled.

[NEWS] How to Clean the PVC Extrusion Screw Properly 2022-05-07

Commodity economy is highly developed today, there is no lack of all kinds of screw cleaners (screw cleaning materials) on the market, most of them are expensive, the use effect is difficult to say. Whether to use commercial cleaners is depends on different situation and production of manufacturers. Plastic production enterprises can also according to their own production situation, using different resins to do screw cleaning material, which can save a large cost for the manufacturer.

[NEWS] How to Make Perfect PVC Edge Banding Tape 2022-04-20

PVC mainly composed of polyvinyl chloride, is polyvinyl chloride resin as the main raw material, adding an appropriate amount of anti-aging agent, stabilizer, calcium carbonate, CPE, dyeing agent, epoxy soybean oil, modifier, etc., after mixing, calendering, etc. It can be divided into soft material PVC and hard material PVC.

[NEWS] Do You Know the Reason of Screw Wear Problem? 2022-04-07

The increase space between screw and screw barrel because of the abrasion. On the one hand, it affects the screw compression and shear of material which led to the decrease of the quality of the product; on the other hand, frequent replacement of wear and failure screw not only increases the cost, but also delays the production plan, resulting in reduced production efficiency.

[NEWS] Plastics Industry in Southeast Asia Presents Opportunities 2022-03-29

Southeast Asia is one of the fastest-growing regions in the world. Countries in this geographic region have contributed to its expansion into a dynamic market and as an attractive investment destination. ASEAN is considered one of the three growth engines in Asia-Pacific, along with China and India. As an important investment destination, Southeast Asia offers many opportunities to businesses. A projection by the Asian Development Bank (ADB) indicates a 5.2% growth for developing economies in Southeast Asia for 2022.

[NEWS] Application and Structure of PVC Plastic Extruder 2022-03-25

Extruder is a kind of equipment that we commonly produce plastic products. Many of our common plastic products are extruded by plastic extruder. When we produce plastic products, we first need to heat up the screw of the plastic extruder through the heating system. Only when the temperature of the equipment rises to the degree that the plastic raw materials are plasticized we can start the equipment for feeding.

[NEWS] How to install PVC wall panel 2022-01-21

[NEWS] High Quality PVC Pulverizer Performance 2021-07-02

PVC pulverizer has the characteristics of high output and low energy consumption, which is widely used in rubber and plastic industry. It is an ideal equipment for processing and grinding hot plastics. It can grind powders of PE, PVC, PP, PS, ABS and other materials.

[NEWS] The Details About PVC Marble Sheet Machine 2021-04-17

PVC marble sheet machine is applied to produce PVC marble sheet with width of 1220mm and length with 2440mm, thickness mostly from 2.5 to 4mm. It is widely used in hotel, office building, supermarket, KTV, massage club and other public areas.