Description of HDPE bottle blow molding machine: This ANDA 75D blow molding machine is suitable for producing small HDPE bottle,volume from 0.5-5L.This kind of machine is high configuration.We use advanced technology.All spareparts are imported brands,such as PLC from Japan.Pneumatic system from Germany,Hydraulic system from Taiwan etc.Our company adopt these famous brands to get machine more stable,easy operation,high output,low power consumption.
By switching mould,it can producing different size of product with high productivity.
Features of HDPE bottle blow molding machine:
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
Parameter of HDPE bottle blow molding machine:
MACHINE MODEL | UNIT | PARAMETER |
Material | | PE,PP,PVC,ABS,PC... |
MAX.Product volume | L | 12L |
Output(cycle time) | pc\hr | 800×2 |
Machine dimension(l*w*h) | M | 4.5*2.9*3.1 |
Total weight | T | 7.5T |
Clamping force | KN | 110 |
Platen opening stroke | mm | 240-620 |
Screw speed | rpm\min | 10-90 |
MAX.Mold Dimension(W*H) | mm | 530*510 |
Cooling water presure | Mpa | 0.2 |
Cooling water rate of flow | m3\hr | 3 |
Air pressure | Mpa | 0.8 |
Air rate of flow | m3\min | 0.8 |
Screw diameter | mm | 80 |
Screw L\D ratio | L\D | 24\1 |
Output of PE | kg\hr | 100 |
Number of screw heating zone | zone | 4 |
Screw heating power | KW | 9 |
Extruder motor power | KW | 37 |
Number of die heating zone | zone | 5 |
Power of die heating | kw | 6 |
MAX.die diameter | mm | 220 |
Oil pump driving power | kw | 11 |
Accumulator capacity | L | 4.4 |