PVC ceiling wall panel making machine production line from china manufacturer
PART I. Introduction of PVC ceiling wall panel making machine production line
1. We are the most professional manufacturer of PVC ceiling making machinery in china, more than 50% china cities has our PVC ceiling panel making machine.
2. Normally the width of PVC ceiling panel is 200mm, 250mm, 300mm, 400mm, 600mm etc... To suggest you the most suitbale PVC ceiling machine, please tell us size of your panel first. It is important.
3. We can offer you turnkey solution of build a PVC ceiling panel factory.
PART II. Three types of surface treatment for PVC ceiling panel:
1. Two color printing: First you will need an extra printing machine, and this printing machine work separately, you need first produce white color PVC ceiling panel, and then use the printing machine to get different design pattern PVC ceiling.
2. Lamination: Use glue to stick the design paper on the surface of PVC ceiling panel. It is connected with the PVC ceiling panel extrusion line.
3. Hot stamp print: Transfer design pattern from hot stamping foil to the surface of PVC ceiling tile. It is connected with the PVC ceiling panel production line.
PART III. PVC ceiling panel manufacturing process:
Step 1: Raw material mixing according to the formula.
Step 2: Use PVC ceiling panel making machine and 3 kinds surface treatment to get product. you can use hot stamping or lamination or two color printing on the PVC ceiling panel surface to get diffferent design pattern.
Step 3: Bad product recycling. During the second step. normally it will occur some waste pruduct, so it will be necessary for you to recycle it.
PART IV. Model and Parameters of PVC ceiling panel machine: