Welcome to ANDA
extrusion blow molding machine is suitable for producing PC 5 gallon bucket,this kind of machine is high speed and high output with high quality.
Product description of 5 gallon PC blow molding machine:
This kind of blow molding machine is using PLC control system, operating manual in English, pneumatic operated, clamping by hydraulic cylinders actuated by pneumatic primary cylinders. Moreover, it equips with deflashing system, resulting in saving time and manual cost for clients.
Technical parameter of PC 5 gallon blow molding machine:
unit | item | specification | discription | note |
Extruding (Main extruding) | Screw diameter | φ82mm | Special exhaust screw for PC |
|
Screw L/D | 38:1 |
|
| |
Material of screw and barrel |
| 38CrMoALA |
| |
Plasticizing capacity | 160KG/Hr | Based on HDPE 5502, changeable with different density of material |
| |
Extruding method | Oil motor | Low speed, big pitch of strand |
| |
Front-back adjusting | Yes |
|
| |
Up-down adjusting | Yes | Chain and turbine running with oil motor |
| |
Temperature control zones | 8 | Temperature medule from Mitsubishi |
| |
Blowers | 4 | Power 120W |
| |
Cooling | Yes | Put cooling water through entrance of screw |
| |
Mold closing unit | Structure
|
| Without bar, bilateral synchronization center-mold closing, with large and average clamping force | Patent |
Mold-moving guide | Ball bearing beeline guide | Small resistance, high speed, high precision, scuff resistance |
| |
Platen dimension | 550×650 mm | Max. |
| |
Platen distance | 350~780mm |
|
| |
Clamping force | 215KN |
|
| |
Fixing mold | Mold pressing platen | Make screw hole on platen, mold pressing platen |
| |
Clamping stroke control
| Inductive switch & moving | Discriminate end of mold opening, low-speed of mold opening, end of mold closing and low-speed of mold closing |
| |
Electric protect
|
| Taiwan FOTEK electric protect switch with six-zone |
| |
Diehead | Structure | Centre-feed | Average press, be able to oppugn |
|
Material |
| 38CrMoALA inner mirror |
| |
Accumulator | 4L |
|
| |
Die mouth | Φ80~Φ120 mm | Min~Max |
| |
Parison thickness controlling | Available | MOOG 100-point |
| |
Injecting stroke conmtrol |
| Accumulator electric ruler & limit switch |
| |
Parison adjustment method | Outer mandral |
|
|
Components of blow molding machine:
Hydraulic system:YUKEN(Japan)
Pneumatic system:FESTO(Germany)
Parison thickness control:MOOG(Japan)
PLC:MITSUBISHI(Japan)
Relay:OMRON(Japan)
Air switch:SCHNEIDER(France)
Contactor:SCHNEIDER(Fracne)
Power:MEAN WELL(TAIWAN)
Solenoid valve:AIRTAC(TAIWAN)
Company information:
We Anda machinery located in Zhangjiagang city,120km to Shanghai city.We have beening in this field for over ten years.We guarantee that our superior quality of blow molding machine can produce high quality products!